Commercial buildings

Design and implementation

This design marketplace consists of 27 containers and 8 empty frames. The marketplace includes small restaurants with outside dining areas and pop-up shops of Czech designers. It is dominated by black colour, with trapezoidal profiled sheets, large glazed parts and tiltable display windows. The walls of the restaurants and lavatories are cladded with black laminated boards, the walls of the shops are cladded with OSBs. Designed for seasonal use.

Design and implementation

A set of three modules of the total area of 3.0 x 16.8m. One container is a waiting room for passengers and the other two are used for commercial purposes. The inner cladding is made of drywall boards, heavy-duty PVC is laid on levelled floor. The outer cladding is made of plate glass. The entire building is air-conditioned. An electric heating system is built in the floor. The sanitary technical installations are mounted only in the close neighbourhood of the area with beverage vending machines. A LED lighting system is used. Individual subsections of the commercial section are equipped with feeders and a communicator.

designed by: Jan Klouček

Design and implementation

A set of twelve 10.0 m x 3.0 m modules. The total area of the construction is 10 m x 36 m. The main section is an entrance hall. The construction includes a meeting room, 11 offices, a strongroom and a sanitary facility including an accessible toilet room. The inner space is made of drywall boards, Tarket Granit Safe is used for the flooring and Tarkett Aquarell Wall HFS PVC cladding is used in the sanitary section. Plastic windows are used in the sanitary section and anthracite aluminium is used for the entrance. Sensor sliding door is used for the entrance. Fully glazed aluminium doors are mounted in individual offices. The sanitary technical installations are built in the walls. The power distribution is provided through low-voltage electrical wiring. The building is equipped with air-conditioning and heated with electric convector heaters, or air-contitioners. A LED lighting system is used. The facade is extended with an aluminium blue RAL 5015 shelter and with a grey metal grids are used for outer cladding.

designed by: Jan Klouček

Design and implementation

15 modular containers were installed in the indoor area of the DEPO 2015 Creative zone in Pilsen. There were two two-storey workshops, one consisting of six and the other of eight modules, with a terrace and an independent single-module ground-floor shop. The construction of the modules corresponds to the renting standards, with non-standard large glass-enclosed zones and a wooden terrace used as a meeting room. The terrace and the upper floor are accessed via outer single staircases.

project design and realization of a two-storey construction with a roof terrace

Information centre provides administration space for the developer and its clients directly at the building-site. The multi-modular construction is used also as a showroom of exterior and interior materials.

Design and implementation

It is a two-storey building, each of the floors consisting of 23 modules. On
the floors, the office rooms are connected by a central corridor. On the
first floor, a toilet for handicapped people, a small kitchen, and technical
background are also located. On the second floor, there are also toilets
for women and for men. The floors are connected by an inner and an
outer staircase. The inner staircase is provided with a ceramic paving
blocks and glass handrails. The facade of the building is made of grey
trapezoidal profiled sheets and dark-grey framed windows, outdoor
blinds, and a light-weight suspended glass sunshade.

Project design and realization of construction

A showroom object is designed and built of four modules. The main function of the building is to provide administrative premises to the sales representatives and clients directly at the construction site of the future residential complex. Interior layout includes the main showroom space, bathroom and storage room. The total floor area is 74 sq m. 

Construction documentation, construction

A sales office for a development project is a modular structure. Upon completion of the residential project, its main part will be relocated and used as a café in the Park Café style. The core of the project contains a sales office with staff facilities. A lesser portion houses a sample showroom and a conference room. After the smaller part is disconnected, the core of the project will be relocated to a new destination and, with minimal construction alterations, it will be used as a café for a new residential project. 

Design and construction

The design provides for two different uses and locations of the building. In Stage 1, during the development of the AFI CITY multi-purpose complex, the building will be used as a sales office. The building is made up of a total of 4 modules, the core for the future café. There is a sales office with staff facilities in it. Following completion of all construction stages of the multi-purpose complex that do not conflict with the placement of the showroom, the building will be divided again into individual modules and relocated to its final position.After the extension, it will be used as a park café (no kitchen) for 60 persons. The original four modules will be extended with 5 additional modules. One of the new modules will house bathrooms and toilets for the café‘s guests and a technical room, the remaining modules will expand the sales area. A terrace accessible via a new exterior staircase in the vicinity of the café’s entrance will be built on the building’s roof (or its part). 

Design and construction

The sales office is a one-storey building. It offers facilities for the developer and its clients directly on the site of construction of the Tuplipa Třebešín residential complex. The building consists of 4 modular containers. The main sales area has toilets and bathrooms adjacent to it. The façade is ventilated, respecting the expression of neighbouring buildings to be erected and providing for assembly / disassembly options. It uses fibre-cement façade white and grey cladding.

Project design and realization of construction

An object of sales office providing administrative premises to the sales representatives and clients with a direct view of the residential complex. This single module building with dimensions of 3 by 6 metres has atypical cladding solution.

Design and constructionDesign and construction

One-storey exhibition container consists of one modular container. All peripheral walls in the framework are glass walls. The container is used as an advertisement module for a vehicle.

project design and realization of construction

Mobile gallery of architecture was made with the intention of introducing the idea of mobile and modular architecture. The symbol of mobility – 20’ shipping container – was chosen as a basic constructional element. Round windows of different sizes create a contrast to the simple cubic form of the object of the container. The form of the facade was inspired by the body of a sea anemone.

Design and construction

It is a one-storey building consisting of four modular containers. The building houses a workshop and an office. 

Design and implementation

The Auto Kelly sales booth is a pilot project of a company who want
to expand outwards their existing brick-and-mortar shops. The booth
consists of a showroom and a storage room. There are no toilets. It

is provided with high-voltage and low-voltage current wiring, air-
conditioning, and a security system. The facade is made of smooth metal

sheets, ready for sticker advertising. Inner surfaces are made of white
laminated board and black heavy-duty PVC.

Design and construction

A sales office for a developer is a modular structure; it houses a sales point with staff facilities. The roof contains a  terrace with a floor accessible via an outdoor staircase.

Design and construction

A one-storey building of a used cars shop of BARTH comprises two modular containers. The structure houses a sales room, a warehouse and staff facilities.

Project and realization of construction

The sales pavilion is designed as two-module single-storey building. It provides sales facilities for developer and its clients directly at the construction site of residential development complex PRI MÝTE. Apart form the main sales area the building contains two offices and sanitary facilities. Total built-up area is 87.7 sq m.

Project of construction

Architectural design of tenis club facilities including all stages of project documentation. The building plan include changing rooms, bathrooms, toilet, lobby and fitness room. 

Construction

Production and assembly of two modular buildings housing toilet at terminal stops in Brno. The building is divided into a part for drivers and for the general public (men, women and disabled individuals). The toilets are paid for using coin machines and are equipped with stainless steel anti-vandal furnishings. 

standardized project of a single-classrom kindergarten including principal´s office based on modular construction

Standardized  detached single-building kindergarten for 25 children is suitable for villages, private kindergartens or as an enlarging project for an existing kindergarten. It is designed with concern to low-cost energy consumption and operating costs. The capacity of the building is variable and can be changed according to the project´s needs.

Project design and realization of the construction

Project is designed as a two-floor modular extension to the existing kindergarten building. The kindergarten has increased its capacity by two classrooms.

Project design and realization of construction

Tailored construction and assembly of a two-classroom kindergarten building including design development, 3D rendering, managing permitting process and construction documents, ground works and technical infrastructure connection. The capacity of the kindergarten was increased up to 50 children.

Project design and realization of construction 

Facility building of the pupils´ traffic playground at Glowackého Primary School provides space for sports equipment storage, changing room, bathrooms, an office space and a common room.

Project and realization of constructionProject and realization of construction

Turn-key construction and assembly of a two-classroom kindergarten building including all the phases of project documentation process, landscaping, connection to the utility infrastructure, interior furnishing and exterior game elements. The newly built kindergarten has a capacity of 50 children.

Design and construction

Turn-key construction and assembly of Stage II of a four-class kindergarten building, including all stages of design documentation, landscaping, connection to the public utilities networks and installation of furniture in the kindergarten and playground equipment in the kindergarten‘s garden. The kindergarten has an overall capacity of 100 children.

Architectural case study

The case study presents a single-storey kindergarten design in the village of Květnice. Due to a potentially limited period for the future use of the plot, the building is proposed as temporary. The industrial design of the façade allowing easy dismantling corresponds with the temporary nature of the object. The layout consists of two classrooms and common kitchen.

Architectural case study

The design of extension to existing kindergarten by additional pavilion. The new part is situated in the kindergarten campus, increasing the total capacity of educational facilities for new pupils.

Project and construction

Proposed one pavilion extension to existing primary school in Kolovraty increases capacity of the school by three classrooms and 90 pupils. The whole object operates as independent educational building with all necessary hygienic facilities and premises for pedagogic staff.The proposed part of the building contains 3 new classrooms, each for 30 children. The corridor allows access to changing rooms, storage, pedagogic staff room, pupil bathrooms, pedagogic staff bathrooms, disabled bathroom and utility room with boiler room.Facade finish of the building is proposed in grey render, only pillars between windows are highlighted by crayon colours. PVC windows are proposed with grey frames. 

Design and construction

A two-storey building housing a school consist of nine modular containers on each floor. Each floor comprises two classrooms and a hall. The floors are connected via outdoor staircases.

Design and implementation

A new building of two-storey two-classroom nursery school without cooking facilities. The school is located in a narrow lot in the neighbourhood of family houses. One classroom is for 15 two to three and the other for 24 three to six years old children. Meals are supplied by the elementary school in Slivenec, using thermoports. With respect to the greater depth of the room, the daily light coming from two sides and it is the main source of light. Siberian Larch cladding is used on inner walls and painted wood is used for cladding of the windows. In the other parts, a contact insulation system is used, coated with plaster. The second floor is e accessed via a two-winged outer steel staircase and a single emergency evacuation staircase. An extensive green roof is used.

designed by: CUBESPACE s. r. o., Vladimír Hladík, Ing. Martina Hlaváčová

Design and construction

The single-storey family house with layout including living room with kitchenette, 2 bedrooms and bathroom with separate toilet, covering total floor area of 74.2 sq m plus 20.1 sq m of terrace. Narrow building plot has predetermined the house‘s distinctly elongated rectangular shape. The house is constructed from volumetric modules and founded on the ground screws. The architecture of the house is defined by simple minimalistic volume and clear lines.

Standardized project of a groudfloor family house with 1 bedroom based on modular system building

Standardized family house is suitable for both city and countryside, for flat or slightly sloping estates. The project respects a smaller size of the parcell but the house still can provide adequate comfort for a 3- or 4-members family. The house construction can be adapted to fit different energy consumption requirements (convenient, economical, low-energy).

standardized project of a groudfloor family house with 2 bedrooms based on modular system building

Standardized family house is suitable for both city and countryside, for flat or slightly sloping estates. The project respects a smaller size of the parcell but the house still can provide adequate comfort for a 3- or 4-members family. The house construction can be adapted to fit different energy consumption requirements (convenient, economical, low-energy).

standardized project of a groudfloor family house with 3 bedrooms based on modular system building

Standardized family house is suitable for both city and countryside, for flat or slightly sloping estates. The project respects a smaller size of the parcell but the house still can provide adequate comfort for a 3- or 4-members family. The house construction can be adapted to fit different energy consumption requirements (convenient, economical, low-energy).

project design and realization of construction

A pilot single-module dwelling produced as a prototype of the new style of housing designed by Cubespace company. The house has total area of 18 sq m. The simple layout of the interior includes living room space and a bathroom. The façade is designed in a combination of cement composite boards combined with wooden planks. Sliding sunblinds and terrace with horizontal and vertical sunshades create distinctive architectural expression of the house. 

Project design and realization of construction

Family house built from four modules and founded on the ground screws. The total floor space of the interior is 90 sq m and exterior terrace provides additional 17 sq m. Because the house is located within the boundaries of nature conservation area it has a sloping roof according to the local regulations. The façade is made of cement composite boards combined with wooden planks.

Project design and realization of construction

Family house with interior floor space of 75 sq m and exterior terrace of 17 sq m. The house is built from three modules and founded on a concrete linear foundation. The layout of the interior includes living room with kitchenette, bedroom and bathroom. The façade is made of squared timber.

Project design and realization of construction

Single module building with floor space of 36 sq m provides occasional dwelling for the manager of the entertainment park. The layout includes living room with kitchenette, bedroom and bathroom. The façade is designed in a combination of squared timber and wooden planks.

Project design and realization of construction

Single module garden dwelling founded on ground screws is providing a comfortable living for a senior in contact with nature in simple interior layout with floor space of 17 sq m. The façade is made of wooden planks.

Project design and realization of construction

Family house designed as modular building easily allowing intended future extension. The first stage of the project (already built) consists of two modules and has a layout with total floor area of 61 sq m including living room with kitchenette, bedroom, bathroom, wardrobe, entrance hall and utility room. The planned one module extension will add another two bedrooms and second bathroom to the current layout, expanding the total floor area to 95 sq m. Generally, the design is minimalistic regarding the aesthetic and spatial solution of the house.

Design and implementation

The facility is a three-storey building consisting of 86 modules. Each floor consists of a central corridor, a dining room, and an inner and an outer staircase. There are also offices, workshops, locker rooms, toilets and bathrooms.

Project author: Ing. Jan Tislický (with the design made by HB Reavis)

Construction

Production and assembly of public toilets at rest stations of the Slovak motorway network. The toilets are equipped with stainless steel anti-vandal furnishings. A total of four buildings were constructed in 2015 and 2016.

project design and realization realization of construction

The building was constructed in two stages. It consists of 3 modules that are used as a technical and employees‘ facility of the photovoltaic park. The project also included a solution of the water management of the building. The façade is made of metal sheets with coloring matching the logo of the client.

project design and realization of construction

The object was constructed as a technical facility for the operation and maintenance of the photovoltaic park with a storage space and garage. The façade is made of plaster with coloring matching the logo of the client.

Project design and realization of construction

The object was constructed as a technical facility for the photovoltaic power plant operation and its maintenance.

Project design and realization of construction

Technological module with dimensions 3 x 9 metres, The fitted technological equipment was supplied by Orlova s. r. o. company. The module functions as a mobile gas boiler plant.

Design and construction

The building houses back offices for the sports compounds. The new structure has been designed as a two-storey rectangular ground-plan building; the ground floor contains a passage to the playgrounds. The back offices include two cloakrooms with a washroom and toilets, each on one floor, and outside toilets for visitors. The building comprises 9 modules. The upper floor is partly recessed and creates a residential area (south terrace) with a view over Prague. The above-ground floors are connected via an exterior staircase. The plaster façade is in two shades of grey. Anthracite windows and exterior doors are made of plastic and are glazed with milk glass.

design and construction

The sports hall is a part of the compounds of the Elena Maróthy Šoltésová primary school in Krupina. The new building has replaced the original school gym that was demolished. During classes, the sports hall is used as a school gym. Outside classes, sports clubs or the general public can use the facility. The hall contains a warehouse for sports equipment, a room for referees and elevated bleachers for 100 viewers. The two-storey part houses entrances, four sets of facilities consisting of a cloak room, a shower and a toilet; this section also contains a public toilet and a disabled-access toilet, a teacher‘s room with a bathroom and a toilet, a medical room / massage room, a fitness centre, a technical room and a reception / cash desk with anticipated sale of petty packed merchandise for tennis players.

Design and construction

This is a 6-module configuration with cloak rooms, storage for sports equipment and showers and toilets. The structure is used as back facilities for primary school.

Design and construction – lease

The project involved lease of 18 modular containers used as site and staff facilities. The modules form 3 separate one-storey buildings – a canteen consisting of 4 modules, 2 independent one-module guard booths and a building with offices and a WC-block assembled from 9 modules.

Design and construction – lease

The project involves a lease of 2 exhibition, partly glazed, modular containers with advertising graphics for Modrá Pyramida‘s marketing event.

Design and implementation

This design marketplace consists of 27 containers and 8 empty frames. The marketplace includes small restaurants with outside dining areas and pop-up shops of Czech designers. It is dominated by black colour, with trapezoidal profiled sheets, large glazed parts and tiltable display windows. The walls of the restaurants and lavatories are cladded with black laminated boards, the walls of the shops are cladded with OSBs. Designed for seasonal use.

Design and implementation

Design and implementation

Design and implementation

The construction consists of two identical, independent buildings, each
of them including 68 residential and sanitary modules. Both buildings are
used as a dormitory facility/shelter. Inside the facility, there are residential
units of different sizes, with a shared sanitary unit in the central section
of the building. The ground floor is barrier-free, including one residential
unit for physically disabled. Each building is divided into two halves, each
of them including two emergency escape routes to the outside of the
house, from upstairs through an outer staircase. All the inner space is
made of drywall gypsum, with PVC flooring, and with glued PVC on the
walls of the sanitary units. The outer cladding is made of metal sheet –
microfelt with the steel framework of the module visible. The windows
are made from white plastic, with an outer manual roller blind, the
entrance door is white, made of aluminium.

Design and implementation

The dormitories for Kronospan workers consist of 64 modules organised
in two storeys with one inner staircase and two outer emergency escape
route staircases. The whole set consists of residential units, each with
a bathroom and a kitchenette. A few modules are reserved for technical
facilities, such as storage rooms, a laundry room, a boiler room. The
corridors are made by crossbarring longer modules. The building is
made of drywall boards, with PVC on the floors. PVC cladding is used in
bathrooms. The hot-water heating system is controlled from the boiling
room on the upper floor. Radiators Radík are mounted in residential
rooms, bathrooms are equipped with an electric heater above the door.
On the outer cladding of the modules microfelt is applied, the customer
installed facade made of their own boards. The windows are plastic, with
inner blinds in dual pane windows.

Standard project of starter homes based on modular system buildings

Starter homes project is a multi-storey modul composition of repeating accommodation units and outdoor courtyard balconies with stairs. Sizes of all rooms can be established for each standard and used materials as well. It is possible to choose from various dispositions – from studio up to apartment consisting of a living room with kitchenette, bedroom and bathroom. The variants are called Ekonom, Standard and Komfort.

Construction documentation for building permit – construction project

Detailed construction documentation for fabrication of technical container, final assembly works execution. The prototype of serial container is designed to be fitted with a biogas station BIO-03 technological system with production capacity 3.0 cu m/hr of purified biogas.

Architectonic concept and a project design of a two one-classroom buildings in the area of an existing kindergarten

Design and construction

A new structure has been added to the existing kindergarten building; with it, the kindergarten has been expanded by three classrooms and kitchen facilities. The two-storey kindergarten building consists of twelve modular containers on each floor. The first floor houses one classroom with facilities, staff facilities and a canteen; the second floor contains two classrooms with facilities. The storeys connect via an outdoor staircase. 

Construction documentation for building permit – construction project

Architectural design case study and construction phasing plan of reconstruction of existing kindergarten. The proposed pavilions are situated in a place of two existing buildings of current kindergarten, an object of a daycare center and an object of a kitchen. The existing buildings will be demolished and the new pavilions are to be built in their place.

Project design and realization of construction

Mobile natural gas fueling station for motor vehicles with self-service filling and payment terminal. The fueling station is adapted to withstand multiple long transports and to be easily erected and dismantled. This mobile fueling station has been presented at the International Engineering Fair in 2012.

Design and construction

Stage II of a new extension to the existing primary school was delivered as a turn-key construction, including all stages of design documentation and connection to the infrastructure of the existing building. The structure houses a total of four classrooms (each for 30 children), a teacher‘s room and a connecting corridor.

Project and construction

This single pavilion extension to existing elementary school building was constructed as a turn-key project including foundations, landscaping works, connecting to existing infrastructure and all the stages of planning permission documentation. The new pavilion has two classrooms (each for 30 children) teacher‘s room and gallery. The new pavilion is designed and built to allow future additional storey extension.

Architectural case study

The case study deals with a casing design of technological device recovering waste heat to produce electricity. The client requested a container-like design to allow the device to be transported by road.

Project design

project design and realization of construction

The family house consists of three modules with total habitable area of 90 sq m. Project was designed for the family of four people. 38 sq m of terraces are surrounding southern and western facades.

Project design and realization of construction

The family house is designed to be constructed in two phases. Already completed first phase forms a fully habitable single storey house consisting of two modules with total habitable area of approximately 45 sq m. Ground screws are used as the foundation for the current building. In the second phase the current house will be expanded in the ground floor level by one additional module and a modular first floor will be constructed. A concrete garage will form a future foundation for the house under the current ground floor level. The house after the completion of the second phase will have a total habitable area of approximately 145 sq m.

project design and realization of construction

Single module creating an extension to an existing family house. The module with the dimensions of 3×9 m is placed on a concrete linear foundation. The modular extension to the traditional architecture of existing house increased the interior area of the house by 20 sq m. The layout of the extension includes bedroom and study. The façade is made of wooden planks.

Project design and realization of construction

Family house built from 3 modules and founded on the ground screws. The total floor space of the interior is 60 sq m and the exterior terrace provides additional 10 sq m. The layout includes living room with kitchenette, bedroom, bathroom and wardrobe. The façade is made of wooden planks.

project design and realization of construction

Family house built from 4 modules and founded on the ground piles. The interior floor space is 99 sq m. The house is designed with a possible option of extending the house by adding a second floor in the future. The façade is made of cement composite boards in two shades of grey and with window frames designed in contrast red coloring.

Design and project of a two two-classroom kindergarten pavilions

The project is situating four classes of the kindergarten into two two-floor pavilions. Pavilions are connected by a roofed assembly hall. The kindergarten is designed as a low energy building with significantly reduced operational costs. The building is partially founded on piles because of the sloping character of the land.

Project design and realization of construction

Family house built from 4 modules and founded on the ground screws. The total floor space of the interior is 92 sq m and exterior terrace provides additional 36 sq m. The house is designed with a possible option of extending the house by adding a second floor in the future. The façade design is defined by the combination of wooden planks and Fundermax composite façade boards.